Home > 1910-1929 WW 1 Era Pre/Post > 1910-1929 WW 1 Era Pre/Post > Helmet Plates
Sort By:
Page of 1
WWI II French RF helmet plate Adrian WWI French Colonial Infantry Helmet Plate Adrian WWI French helmet plate supply intendance
Reproduction of a WWI/II French helmet plate worn by unnumbered Zouave and Tirailleur units on the Adrian helmet.
  • Comes with a double prong back attachment.
  • This plate has a primer coat and may have some light rust.
  • It must be painted to match the color of the helmet.
  • Measures 2 x 2 1/8 inches, stamped metal.
  • Listing for one, photo shows front and back.
Reproduction of WWI - WWII Colonial Infantry helmet plate for the French style "Adrian" helmet. 
  • It is stamped metal construction and has the backing prongs.
  • Size is 2 x 3 inches.
  • Listing for one, photo shows front and back.
Reproduction of WWI French Helmet plate for the Adrian helmet. 
  • Intendance or commissary (supply) branch.
  • Comes complete with 2 prong attachment on back to fasten to Adrian helmet. 
  • Size is 2 3/4 x 2 3/4 inches. 
  • Listing for one, photo shows front and back.
WWI French Medical helmet plate Adrian WWI - WWII French Infantry Helmet Plate Adrian Post WWI French Tank Corps Helmet Plate Adrian
Reproduction of a WWI French Medical helmet plate (Infirmiers) for the Adrian helmet. 
  • Comes with a double prong back attachment. 
  • This plate has a primer coat and may have some light rust. 
  • It must be painted to match the color of the helmet. 
  • Measures 2 3/4 x 3 1/4 inches stamped metal. 
  • Listing for one, photo shows front and back.
Reproduction of WWI - WWII French Infantry (and other branches not covered by special plates) helmet plate for the French style "Adrian" helmet. 
  • It is cast from original dies and has the backing prongs. 
  • Size is 1 7/8 x 2 7/8 inches. 
  • Listing for one, photo shows front and back.
Reproduction of Post WWI French Tank Corps plate for the French style "Adrian" helmet.
  • It is cast from original dies and has the backing prongs. 
  • Size is 2 x 2 inches.
  • Listing for one, photo shows front and back.
WWI French tank artilery helmet plate Adrian WWI/II French Zouaves 7th helmet plate Adrian French Adrian helmet plate medical replica WWII
Reproduction of a WWI French Artillery/Tank Corps helmet plate (Artillerie/Chars de Combat) for the Adrian helmet.
  • Comes with a double prong back attachment. 
  • This plate has a primer coat and may have some light rust.
  • It must be painted to match the color of the helmet. 
  • Measures 3 1/2 x 2 1/8 inches stamped metal.
  • Listing for one, photo shows front and back.
Reproduction of a WWI/II French 7th Zouaves helmet plate for the Adrian helmet.
  • Comes with a double prong back attachment. 
  • This plate has a primer coat and may have some light rust. 
  • It must be painted to match the color of the helmet. 
  • Measures 1 7/8 x 2 1/8 inches, stamped metal. 
  • Listing for one, photo shows front and back.
Reproduction of a French 1930's-WWII metal helmet plate worn on the Adrian helmet for medical personal. 
  • This 2 inch round style replaced the larger WWI model for wear on the Adrian helmet.
  • It has a double prong on the back for attaching to the helmet. 
  • Needs to be painted to match the color of the helmet you want to put it on.
WWI Free French aviation helmet plate Adrian WWI French 1st Marocains helmet plate Adrian WWI/II French Zouaves 3rd helmet plate Adrian
Reproduction of a WWII Free French Aviation Helmet plate for the "Adrian" helmet. 
  • It is stamped metal construction and has the proper backing prongs. 
  • Measures 2 1/4 inches round, stamped metal. 
  • Listing for one, photo shows front and back.
Reproduction of a WWI French 1st Marocains Tirailleurs rgt helmet plate for the Adrian helmet 1942. 
  • Comes with a double prong back attachment. 
  • This plate is in galvanized steel color for use on the brown Adrian helmet. 
  • Measures 2 3/16 inches round, stamped metal . 
  • Listing for one, photo shows front and back.
Reproduction of a WWI French 3rd Zouaves helmet plate for the Adrian helmet. 
  • Comes with a double prong back attachment. 
  • This plate has a primer coat and may have some light rust. 
  • It must be painted to match the color of the helmet.
  • Measures 1 7/8 x 2 1/8 inches, stamped metal . 
  • Listing for one, photo shows front and back.
WWI French spahis Marocains helmet plate Adrian WWI - WWII French Artillery Helmet Plate adrian WWI II French 9th Tirailleurs helmet plate Adrian
Reproduction of a WWI French Spahis Marocains helmet plate for the Adrian helmet. 
  • Comes with a double prong back attachment. 
  • This plate is in brass color for use on the brown Adrian helmet. 
  • Measures 2 3/16 inches round, stamped metal . 
  • Listing for one, photo shows front and back.
Reproduction of WWI - WWII French Artillery helmet plate for the French style "Adrian" helmet.
  • It is cast from original dies and has the backing prongs. 
  • Size is 3 1/4 x 2 5/8 inches.
  • Listing for one, photo shows front and back.
Reproduction of a WWI/II French 9th Tirailleurs helmet plate for the Adrian helmet. 
  • Comes with a double prong back attachment. 
  • This plate comes in a dark brown bronze color for use on the brown Adrian helmet. 
  • Measures 2 inches round, stamped metal . 
  • Listing for one, photo shows front and back.
WWI French colonial helmet plate Adrian WWI - WWII French Navy Helmet Plate Adrian WWI - II French Zouaves 11th helmet plate adrian
Reproduction of a WWI/II French Colonial forces helmet plate (Truppe de Marine) for the Adrian helmet. 
  • This particular style was also used by the French Navy. 
  • Comes with a double prong back attachment. 
  • This plate has a primer coat and may have some light rust. 
  • It must be painted to match the color of the helmet. 
  • Measures 2 1/2 x 1 3/4 inches stamped metal. 
  • Listing for one, photo shows front and back.
Reproduction of a WWI - WWII French Navy helmet plate for the French style "Adrian" helmet. 
  • It is stamped metal construction and has the backing prongs. 
  • Size is 2 1/2 x 1 3/4 inches. 
  • Listing for one, photo shows front and back.
Reproduction of a WWI/II French 11th Zouaves helmet plate for the Adrian helmet. 
  • Comes with a double prong back attachment. 
  • This plate has a primer coat and may have some light rust. 
  • It must be painted to match the color of the helmet. measures 1 7/8 x 2 1/8 inches, stamped metal . 
  • Listing for one, photo shows front and back.
WWI - II French Zouaves 15th helmet plate Adrian WWI - WWII Polish Helmet Plate Adrian WWI Czech Legion helmet plate adrian style
Reproduction of a WWI/II French 15th Zouave helmet plate for the Adrian helmet. 
  • Comes with a double prong back attachment. 
  • This plate has a primer coat and may have some light rust. 
  • It must be painted to match the color of the helmet. measures 1 7/8 inches round, stamped metal. 
  • Listing for one, photo shows front and back.
Reproduction of a WWI - WWII Polish helmet plate, for the French style "Adrian" helmet. 
  • It is stamped metal, and has the backing prongs. 
  • Size is 2 1/4 inches round. 
  • Listing for one, photo shows front and back.
Reproduction of a WWI Czech Legion helmet plate for the french style Adrian helmet. 
  • As used by the czech legion who fought on the side of the allied forces.
  • Complete with 2 back prongs.
  • Size 2 1/2 X 3 inches, made of steel. 
  • May need to be cleaned a little. 
  • Please see our our french style helmet plates
French Adrian helmet plate Petans Presidental WWI - WWII French Engineer Helmet Plate Adrian WWI French Moroccan helmet plate Adrian
Reproduction of a French Adrian helmet plate for, Marshall Petans Presidential Guard Troops. 
  • Used during the Vichy era 1940-45, occupied France. 
  • Metal construction with enameling, 2 prongs on back to attach to helmet,
  • Size 2 1/8 x 1 13/16 inches. 
  • Listing for one, photo shows front and back.
Reproduction of a WWI - WWII French Engineer helmet plate for the French style "Adrian" helmet. 
  • It is stamped medal just like the originals and has the backing prongs.
  • Size is 3 x 1 3/4 inches. 
  • Listing is for one (1) badge, photo shows front and back.
Reproduction of a WWI French Moroccan helmet plate for the Adrian helmet. 
  • Comes with a double prong back attachment. 
  • This plate is in brass color for use on the brown Adrian helmet. 
  • Measures 1 7/8 x 2 inches , stamped metal. 
  • This listing is for one (1) badge photo shows front and back.
French Air Force helmet plate Adrian WWII French Adrian helmet plate Naval Gendarmerie WWI Romanian Helmet Plate for French Adrian Helmet
Reproduction of the French model 1937 helmet emblem for the French Air Force. 
  • Worn on the Adrian helmet and m-35 tankers helmet from 1937 through WWII. 
  • Stamped metal construction, 2 metal tabs on back of plate to attach to helmet. 
  • Measures 2 inches round. 
  • Listing for one, photo shows front and back.
Reproduction of a French Adrian helmet front plate for, Naval Military Police. 
  • (Marine Gendarmerie) used after WWII, Indochina war era and into the 1960s.
  • Metal construction with 2 prongs on back to attach to helmet,
  • Size 1 7/8 inches round. 
  • Listing for one, photo shows front and back.
Reproduction of WWI Romanian helmet plate for the French style "Adrian" helmet. 
  • It is cast from original dies and has the backing prongs. 
  • Size is 3 inches round. 
  • Listing for one, photo shows front and back.
WWI US Field Service helmet plate Adrian
Reproduction of WWI US field service helmet plate for the Adrian helmet.
  • Measures 2 3/4 x 1 1/2 inches 
  • Made of brass stamped metal.
  • Listing for one, photo shows front and back.