|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction 1920's - WWII US Navy Officer's Cap Emblem. - Worn up to 1941.
- Eagle faces right.
- Made of soft metal gold colored anchors silver colored eagle and shield.
- Screw back post and clutch back pin to attach to hat.
- Size is 2 1/4 x 2 3/8 inches.
- Listing is for a one (1), photo shows front and back.
|
Reproduction of an US Army officers US collar device- For shirt or cap. made of metal with pin back.
- Size is 7/8 x 1/2 inch.
- This listing is for one, photo shows front and back.
|
Reproduction of the first US Army WWI metal pilots wing, late. - Size is 1 /3 inches, with clutch back pins.
- Made of metal, silver colored with gold colored us in center of shield.
- Listing is for 1 photo shows front and back
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction WWI US Army Officer's Hat Badge.- Made of metal with screw back attachment and 2 clutch back pins.
- Size is 2 x 2 inches, post is 5/8 inches long.
- Listing is for 1, photo shows front and back
|
Reproduction of a WWI US Army Enlisted Man's (EM) Hat Badge. - Made of metal with screw back attachment.
- Size is 1 1/2 inches round, post is 3/8 inches long.
- Listing is for 1, photo shows front and back
|
Reproduction of the first US Army metal pilots wing, first worn in 1911 and called a military aviator.- Pin back.
- Size 1 3/4 x 1 1/8 inches.
- Made of a gold colored metal.
- Listing is for 1 photo shows front and back
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction WWI Royal Naval Air Service RNAS Officer metal cap badge. - Worn on the service hat.
- They are made of bronze/black color metal.
- 2 prongs on the back to attach to hat.
- Size is 2 3/4 x 2 1/2 inches.
- Listing is for one, photo shows front and back
|
Reproduction WWI cap badge for enlisted personnel of the Royal Flying Corps. - They are made of bronze color metal (no pins are included).
- Measures 1 1/2 x 1 7/8 inches.
- Listing is for one, photo shows front and back
|
Reproduction of Army Air Service Officer's insignia. - They are bronze and pin back.
- Size 1 3/4 x 1 inches.
- Listing is for 1 pair, photo shows front and back.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction of a WWI Collar Emblems for enlisted personell of the Royal Flying Corps. - They are made of bronze color metal (no pins are included).
- Measures 1 x 1 1/4 inches.
- Listing is for a pair, photo shows front and back
|
Reproduction of a WWI US Army Officer's Aviation Section insignia .- Made of metal with pin back attachment.
- Size is 1 1/4 x 1 1/16 inches.
- Listing is for a pair, photo shows front and back.
|
Reproduction of a WWI US Army Officer's unofficial Air Service insignia .- Made of metal with pin back attachment.
- Size is 1 1/4 x 1 1/16 inches.
- Listing is for a pair, photo shows front and back.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction of a WWI US Army Enlisted Man's (EM) Collar Disks, Calvary. - Made of metal with screw back attachment.
- Size is 1 1/16 inches round, post is 3/8 inches long.
- Listing is for 1 US disk and 1 Crossed sabers disk, photo shows front of pair and back post.
|
Reproduction of a WWI US Army Enlisted Man's (EM) Collar Disks. - Made of metal with screw back attachment.
- Size is 1 1/16 inches round, post is 3/8 inches long.
- Listing is for 1 US disk and 1 Crossed rifle disk, photo shows front of pair and back post.
|
Reproduction of a WWI Lafayette Escadrille badge. - Worn by US pilots who were fighting for the French.
- Size is 1 3/8 1 3/4 inches, gold finish with pin back.
- Listing is for 1 photo shows front and back
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction of a pair of us army officers us collar devices.- Made of metal with pin back.
- Size is 3/4 x 1 inch.
- This listing is for a pair 2 pieces, photo shows front and back.
|
Reproduction of a WWI US army enlisted man (em) pilots wing. worn on the left sleeve. - White thread machine embroidered on black wool.
- Size 1 7/8 x 6 inches .
- Listing is for 1 photo shows front and back
|
Reproduction pair of pin back Army Air Corps officer's collar insignia used approximately 1925 through the late 1930s.- The wings are 1 3/4 inches across.
- These are the same style as the WWI wings but are in gold with a silver prop rather than bronze.
- Listing is for (1) photo shows front and back.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction of a WWI observer half wing. - Hand embroidered silver bullion on, OD wool.
- Size is 2 3/4 x 1 3/4 inches.
- Listing is for 1 photo shows front and back
|
Reproduction of a WWI US Army Enlisted Man's (EM) Collar Disks, Aviation.- Made of metal with screw back attachment.
- Size is 1 1/16 inches round, post is 3/8 inches long.
- Listing is for 1 US disk and 1 Wing with Silver Prop disk, photo shows front of pair and back post.
|
Reproduction of a WWI US Army Officer's Quartermasters insignia .- Made of metal with pin back attachment.
- Size is 1 x 1 inches.
- Listing is for a pair, photo shows front and back.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction WWI US Navy Naval Aviator with device Ensign. - Device is a navy shield with wings in bullion thread.
- No buttons.
- Size 2 1/4 x 5 1/4 inches.
- Metal grommet button hole.
- Listing is for a pair, photo shows front and back.
|
Reproduction WWI US Navy Naval Aviator with device, Lieutenant Junior Grade, Lt JG . - Device is a navy shield with wings in bullion thread.
- No buttons.
- Size 2 1/4 x 5 1/4 inches.
- Metal grommet button hole.
- Listing is for a pair, photo shows front and back.
|
Reproduction WWI US Navy Naval Aviator with device, Lieutenant, Lt . - Device is a navy shield with wings in bullion thread.
- No buttons.
- Size 2 1/4 x 5 1/4 inches.
- Metal grommet button hole.
- Listing is for a pair, photo shows front and back.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reproduction of a WWI observer half wing, dallas style 2nd model.
- Size is 1 1/8 x 2 3/8 inches, pin back.
- Metal wings on wool backing, wings are a aged silver finish.
- Listing is for 1 photo shows front and back
|
Reproduction of a WWI pilots wing, Dallas style. - Size is 1 1/8 x 3 3/4 inches, pin back.
- Metal wings on wool backing, wings are a aged silver finish.
- The US in the center of the shield are separate pieces and are gold finish.
- Listing is for 1 photo shows front and back
|
Reproduction of a WWI observer half wing, dallas style 1st model. - Size is 1 1/8 x 2 3/8 inches, pin back. metal wings on wool backing, wings are a aged silver finish.
- The US in the center of the shield are separate pieces and are gold finish.
- Listing is for 1 photo shows front and back
|
|
|
